1. cnc plasma cutting machine description
Brief Introduction of cnc plasma cutting machine
YM-CS Gantry CNC plasma and flame cutting machine is a kind of high-efficiency steel plate automatic cutting equipment developed by our company for various shapes of metal sheets. cnc plasma cutting machine price adopts gantry structure type, bilateral drive and gear rack. cnc plasma cutting machine price has characteristics of good rigidity, high speed, hollow box design and good heat dissipation; cnc plasma cutting machine price can cut longitudinally and horizontally, and can also cut in any direction of arc curve, with high cutting surface roughness and precision, and small deformation; adopting both vertical and horizontal directions Imported high-precision reducer improves the machine's running accuracy from every link. cnc plasma cutting machine price has a backlash-free gearing transmission mode, which can run dexterously and smoothly at high speed and has high cutting precision. The gear rack adopts special gear rack for machine tools, which has large bearing capacity and high transmission accuracy. cnc plasma cutting machine price is also competitive in the market.
2. cnc plasma cutting machine price is good because of Basic Machine Configurations
Mechanical part
| 1 | Machine Width | 4000mm |
| 2 | Longitudinal rail length | 10000mm |
| 3 | CNC plasma cutting torch | 1set |
| 4 | THC | 1set |
| 5 | Flame torch | 1set |
| 6 | Automatic ignition device | 1set |
| 7 | Cutting torch lifting body | 2 sets |
| 8 | Drive way | Servo bilateral drive |
| 9 | Pipeline transmission method | Horizontal drag chain, vertical drag chain |
| 10 | Central gas gathering control system | 1set |
| 11 | System, console direction | Specific according to user requirements |
| 12 | The purchaser is responsible for these parts | The construction of cutting platform, heavy beam production, cement foundation of installation site, transmission of longitudinal pipelines and other basic work will be installed by buyer, and the supplier will provide drawing guidance. |
Electronic control part
| 1 | CNC Controller | Shanghai Jiaotong University F2300B |
| 2 | Plasma power source | According to your needs |
| 3 | Flame torch | Wuxi Longteng |
| 4 | Drive system/motor | Panasonic |
| 5 | Reducer | New Start |
| 6 | Automatic programming, nesting software | Starcam |
3. Machine Working Conditions
| 1 | Power source voltage/frequency | Three Phase 380v±10%/50HzSingle Phase 220v±10%/50Hz |
| 2 | Input power | 3KW |
| 3 | Compressed air | Dry and oil-free; Pressure: 0.8Mpa Flow: 1.0 m3/h |
| 4 | Gas type | Propaneacetylenepropylenenatural gas. |
| 5 | Ambient temperature | 0-50℃ |
| 6 | Relative humidity | <90% non-condensing |
| 7 | Surroundings | Ventilation. No major impact within 5 meters |
| 8 | Earthquake level | Fortify at level six |
4. cnc plasma cutting machine price is valuable because of Detailed Parts
|
Name |
Picture |
Detailed introduction |
|
Machine frame |
|
8mm thick steel welded ,strong structure(other company usually uses 6mm thick steel ) |
|
Front beam |
|
20mm thickness front beam , after one time large gantry milling ,increase the parallelism and positioning accuracy |
|
Hollow design |
|
It adopts hollow design, good heat dissipation, increase structural strength, longtime use there is no deformation.Overall shot blasting to ensure beam appearance quality;Overall spray treatment, furnace annealing, guarantee removal of welding stress;CNC milling to ensure high precision of processing dimensions, vibration aging to prevent processing deformation; multi-pass spraying to ensure coating thickness and adhesion. Quality inspection: special quality inspection of each process |
|
Longitudinal drive control system
|
|
Drive mode: bilateral Panasonic servo driveTransmission mode: precision gear, rack, national standard guide rail and servo high-precisionpositioning transmissionGear rack: gear accuracy level 6, rack module 2. Protection measures: The eccentric clamping wheel adopts dust-proof bearings and sheet metal cover to prevent servo electrical appliances from being polluted by dust. |
|
Lateral drive control system |
|
Drive mode: Panasonic servo drive.Transmission mode: precision gear, rack, and servo high-precision positioning transmission, which can achieve smooth movement between the main torch and sub torch through steel rope drive deviceLateral guide rail: high-precision single-axis core guide.Gear rack: gear accuracy level 6, rack module 2. Connection mode: gear rack meshing connection. |
|
Pneumatic transmission mode |
|
There are many cables and air sources in longitudinal direction, which will affect the smoothness and reliability of machine operation. The drag chain follow-up mechanism is adopted to ensure cleanliness of pipeline. , And it can also reduce the tendency of machine to overshoot when running at high speed.It can prevent the pipeline from being worn out by high-speed cutting movement; it can also save pipeline length. |
|
Longitudinal rail |
 |
Guide rail specifications: national standard heavy 24Kg or 30KgRail material: high-strength heat-treated railGuide rail processing: It is made by grinding with high-precision guide rail grinder to ensure the high precision and stability of cutting machine. Heat-treated heavy-duty rack is installed on outside of guide rail to ensure high precision and long life of the transmission |
|
CNC cutting torch moving body |
|
Material: high-quality aluminum plateProcessing method: CNC drilling and millingAuxiliary components: Cooperate to assemble various CNC lifting bodies, etc. |
|
Automatic ignition device |
|
Ignition method: continuous pulse automatic electronic ignitionControl mode: manual control on the operation panel, add command control in programComponent features: The service life is greatly extended, the degree of automation is high, the labor intensity of workers is reduced, the safety is improved, and the advantages of multiple cutting torches are more prominent |
|
Plasma cutting torch anti-collision device |
|
360° anti-collision mechanism is controlled by sensor. Once the plasma cutting torch is hit in any direction, the machine immediately stops moving. |
|
CNC Controller |
|
Component composition: cnc control box, cnc controller , button control panel, and other related electrical components. |
|
Electrical control box |
|
Components: electrical control box, Panasonic servo drives, Schneider Electric components, etc.. |
5. cnc plasma cutting machine price is decided by Technical Parameters
|
1 |
Effective cutting width |
3150 mm |
|
2 |
Effective cutting length |
8000 mm |
|
3 |
Flame cutting thickness |
6-150 mm |
|
4 |
Plasma cutting thickness |
≤30mm |
|
5 |
Cutting torch lifting distance |
200 mm |
|
6 |
Operating speed of whole machine |
0-9000 mm/min |
|
7 |
Setting speed error |
≤±5% |
|
8 |
Automatically adjust high precision |
≤±1.0mm |
|
9 |
Longitudinal straight line accuracy |
±0.3mm |
|
10 |
Overall accuracy of whole machine (According to the right graphics) side length (four sides) 1000X1000 Scribing speed 500-800mm/min |
|
|
11 |
Side length (four sides) |
±0.5mm |
|
12 |
Diagonal error|AD-BC| |
±0.5mm |
|
13 |
Back to origin deviation |
±0.2mm |
|
14 |
Intersection deviation |
±0.5mm |
|
15 |
Forward and reverse straight line deviation |
±0.2mm |
|
16 |
Cutting surface quality (roughness) (select δ=25 plate) |
Rz(um)=70+1.2a Roughness 12.5 |
|
17 |
Perpendicularity and slope tolerance |
μ(mm)=0.4+0.015a Tool: Angle ruler |
|
18 |
Straight angle |
Diagonal error≦±0.2 mm |
|
19 |
Unevenness of walking |
longitudinal≦±0.2mm/effective lengthHorizontal≦±0.2mm/effective length |
|
20 |
Torch angle error |
≦±0.5º |
|
21 |
Equipment noise |
≤80decibel |
|
22 |
Package size |
4300x1900x1700 14CBM 1700KGS Wooden case or 20 feet container |
6. cnc plasma cutting machine price is worthy because of Main Parts are top brands
|
No. |
Name |
Brand |
Origin |
Basic functional |
|
1 |
CNC Controller |
Shanghai Jiaotong University F2300 |
China |
It has complete functions and stable performance, which can compensate work piece for slitting. |
|
2 |
Automatic programming nesting software |
Starcam |
America |
compensation, plasma bridging, flame co-edge continuous cutting, sharp corner processing, CAD layered cutting, text annotation, etc. |
|
3 |
Servo drive/motor |
Panasonic |
Japan |
Accurate speed control, torque speed characteristics are very hard, simple principle, easy to use, |
|
4 |
Reducer |
Newt Start |
China |
High reliability, high performance data, compact structure, light weight |
|
5 |
Electromagnetic valve | AirTAC | Taiwan | High temperature resistance, stability, good sealing |
|
6 |
Cable |
Shanghai Cardiff |
China |
Long service life, strong anti-interference ability |
|
7 |
Electrical switches and relays |
Schneider |
France |
Stable performance |
|
8 |
Hose |
Sanshan |
Korea |
High pressure resistance, long service life |
|
9 |
THC |
Hong Yuda |
China |
High control accuracy, stable performance, strong anti-interference ability |
|
10 |
Cutting torch lifting device |
YOMI |
China |
Lifting motor, lead screw, double cylindrical linear sliding guide |
|
11 |
CNC frame |
YOMI |
China |
Steel box welded heavy gantry structure |
|
12 |
Power source |
According To your need |
China |
The cutting speed is extremely fast and the cutting effect is very good |
cnc plasma cutting machine price List of random tools
|
No. |
Name specification |
Number |
Unit |
|
1 |
M4 six angle wrench |
1 |
set |
|
2 |
M5 six angle wrench |
1 |
set |
|
3 |
M6 six angle wrench |
1 |
set |
|
4 |
M8 six angle wrench |
1 |
set |
|
5 |
M10 six angle wrench |
1 |
set |
|
6 |
M16 six angle wrench |
1 |
set |
|
7 |
6 "one screw screwdriver |
1 |
set |
|
8 |
6 "ten" screwdriver |
1 |
set |
|
9 |
Adjustable wrench |
1 |
set |
|
10 |
Needle |
1 |
set |
15.cnc plasma cutting machine price is competitive Project Case
16. Cutting Sample
17. cnc plasma cutting machine price include good After-sales service
(1) After check and accept by clients, the warranty period is 1 year.
(2) During 1 year warranty period, Yomi provides free repair service in case of failure due to defective part/ component, and replace defective part/component free of charge. Transportation costs are borne by clients ,such as express fees.
(3) During the 1 year warranty period, when we get maintenance call ,we will reply within 8 hours,and set up a 1:1 chat group on WhatsAPP or QQ to follow-up,through video and computer remote control etc,guide the customer to remove the fault or replace accessories.
If clients need on-site repair,Yomi will arrange the overseas engineer ( usually 1 person ,can speak English) immediately,the cost of air tickets (round trip), food, accommodation, local transportation, translation, internet, communication and visa charges for our engineers at buyer’s site shall be borne by customer at actual against documentary evidence.
Travel allowance USD 100/per person per day for eight (8) hours for travel from China to customer’s local project site and return shall be considered extra at actual.
(4) After the warranty period,the replacement parts will be charged at the cost price.Transportation costs are borne by clients ,such as express fees/air costs.
(5) Controller system and software will lifetime upgrade free .
(6) Except for human damage for machine, Yomi supply life-long maintenance service.
